Payson 760 Swivel / 761 Rigid GENERAL DUTY

Load Capacity Per Caster: n/a

FEATURES & BENEFITS:

Large raceways deeply embossed for extra strength and bearing surface
Hydraulically upset kingpin for thrust absorption
1 5/8" casters have riveted axles
Zinc plated
5/16" shouldered axle for 2 and 2 1/2" models
3/8" shouldered axle for 3" models
3/8" straight axle for 4" models with 1/2 x 3/8 x 1 13/16" spanner bushing
The solid, one-piece steel "761" is embossed for extra strength

applications:

The "760" is an economical, all-purpose caster of single ball race construction, made of heavy gauge cold-rolled steel. Simplicity of design renders a combination of quality with low cost. For equipment in the range of 100 to 1400 lbs. Widely used on furniture dollies, box and platform trucks, bakery racks, laundry and linen baskets, and other equipment on which applications require an economical single ball race caster.

Payson 020 Swivel / 021 Rigid LIGHT DUTY

Load Capacity Per Caster: n/a

FEATURES & BENEFITS:

ICM standard
Constructed of cold-rolled steel and embossed for extra strength, the "020" is a double ball-race caster, heat-treated for longer wear and greater strength
Larger Diameter Raceways. 3/8" Hydraulically Upset Kingpin
Heat Treated Wrap-around Brackets
Vibratory finished means smart, bright appearance
Zinc plated. 5/16" shouldered nut and bolt axles for wheel replacement
Lock nuts for security
The solid, one-piece steel "021" is embossed for extra strength to provide a matching rigid for the "020"
A wide variety of stem casters in light, medium and heavy duty are also available
NSF CERTIFIED

applications:

For equipment in the load range of 100 to 600 lbs. The "020" is designed for use on the following equipment: tool carts, food service trucks, hospital, appliance, office and other portable equipment.

Payson 080 Swivel / 081 Rigid series MEDIUM HEAVY

Load Capacity Per Caster: n/a

FEATURES & BENEFITS:

"080" has been especially designed to carry heavy loads in which a low over-all height and wide tread wheel are essential ingredients.
Construction is of heavy gauge, cold-rolled steel, double ball bearing design, embossed for additional strength and style.
.225 Top Plate.
5/8" Hydraulically Upset Kingpin.
One-piece .149 Wrap-around Bracket Projection welded to .165 Top Cup.
.149 Bottom Cup.
Case Hardened.
1/2" Axle.
Zinc Plated.
Lubrication Fittings.
3 x 1 13/16" Plexite Phenolic Resin Wheel with Roller or Delrin Bearing.
COMPANION "081" RIGID
.149 embossed legs welded to a .225 top plate.
NSF CERTIFIED

applications:

n/a

Payson 200 Swivel / 201 Rigid series MEDIUM HEAVY

Load Capacity Per Caster: n/a

FEATURES & BENEFITS:

The "200" is a precision-build swivel caster with two perfectly aligned swivel raceways
All the cold-formed parts are made to exacting tolerances from heavy gauge steel and are hardened for severe service and long wear
.225 Top Plate
One-piece .187 Wrap-around Bracket Projection welded to .165 Top Cup
5/8" Hydraulically Upset Kingpin
.149 Bottom Cup.
Case Hardened.
Zinc plated vibratory finish.
Lubrication fittings for swivel and wheel.
1/2" nut and bolt axles.
3/4 x 1/2 x 2 5/16" hardenedspanners
COMPANION "201" RIGID
.149 embossed legs welded to a .225 top plate
NSF CERTIFIED

applications:

For equipment in the load range of 500 to 4000 lbs. A large selection of wheels makes it adaptable to a variety of industrial and institutional equipment. Widely used on warehouse trucks, refuse containers, linen carts, etc.

Payson 290 Swivel / 291 Rigid series HEAVY MEDIUM

Load Capacity Per Caster: n/a

FEATURES & BENEFITS:

The "290" offers the ultimate in a heavy medium duty cold-forged steel caster. Extraordinary design features allow for punishing service under severe operating conditions
3/4" Hydraulically Upset Kingpin
5/16" thick Cold Forged Top Plate
1/4" Cold-forged Top Cup with 5/16" Balls
1/4" Thick Cold-forged Bottom Cup with 5/16" Balls
.194 Embossed Legs welded to Top Cup
All Parts Case Hardened
Zinc plated finish
1/2" nut and bolt axles
3/4 x 1/2 x 2 5/16" hardened spanners
Lubrication fittings for swivel and wheel
COMPANION "291" RIGID
The "291" has thick, embossed legs welded to a husky top plate

applications:

For equipment in the load range of 1500 to 5000 lbs. Large wheel selection allows for a variety of general applications. Especially suited for rugged conditions.

Payson 600 Swivel / 601 Rigid series HEAVY TIMKEN

Load Capacity Per Caster: 200-1,200 lbs.

FEATURES & BENEFITS:

The "600" is the ultimate in a super heavy duty caster design
The watch-like swivel construction is incomparable
Each cold-forged steel component part is heat-treated for the most severe operating conditions imaginable
The word "indestructible" was meant for this Series
1/2" Coined Embossed Cold-forged Top Plate
1 1/2" King Bolt, welded in place
Thrust Load carried by 1 1/4" Timken Roller Bearing
4" Load Bearing Raceway with 1/2" Balls
3/8" Legs welded on both sides to the Yoke Base
COMPANION "501" RIGID
The "601" has 3/8" embossed steel legs welded on both sides to a 1/2" top plate
Zinc plated finish
1" axle
1 1/4 x 1 x 3 3/8" hardened spanners
Grease fittings in swivel and wheel

applications:

For the most severe applications with capacities up to 14,000 lbs. Originally designed for the mobile home industry, the "600" is also ideal for the heaviest manually operated loads and power-driven equipment.